FixVault
Home › Chevrolet › 2004 › Venture Base, Van Cargo Extended › Repair and Diagnosis › Body & Frame › Frames, Subframes & Crossmembers › Frame And Underbody › Repair Instructions › Assist Step Replacement › Installation Procedure

Installation Procedure

    Fig 1: View Of Assist Step Assembly
    GM759867Courtesy of GENERAL MOTORS CORP.
  1. Position the assist step to the assist step brackets.
  2. Install the assist step nuts and hand tighten.
    3. NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Align the ends of the assist step bar 10 mm from the rocker panel.

    Tighten:  Tighten the assist step nuts to 10 N.m (89 lb in).

About FixVault