FixVault
Home › Chevrolet › 2004 › Venture Base, Van Cargo Extended › Repair and Diagnosis › Body & Frame › Windows › Door System, Mirror System & Window System › Repair Instructions › Door Trim Plate Replacement › Removal Procedure

Removal Procedure

    Fig 1: View Of Left Power Switch
    GM319753Courtesy of GENERAL MOTORS CORP.
  1. Use the following procedure in order to remove the switch mounting plate:
    1. Use a flat-bladed tool at the rear of the switch mounting plate in order to release the clip.
    2. Lift up in order to unsnap the mounting plate from the front door trim panel.
  2. Disconnect the electrical connectors.
    3. Fig 2: View Of Switch Mounting Plate
    GM319756Courtesy of GENERAL MOTORS CORP.
  3. Unsnap the switch from the mounting plate.
About FixVault