FixVault
Home › Chevrolet › 2004 › Venture Base, Van Cargo Extended › Repair and Diagnosis › Body & Frame › Windows › Door System, Mirror System & Window System › Repair Instructions › Roller Bracket Replacement - Lower › Removal Procedure

Removal Procedure

  1. Remove the front edges of the sliding door inner trim panel in order to gain access to the sliding door lower roller bracket bolts.
  2. Mark the location of the sliding door lower roller bracket to the sliding door with a grease pencil.
  3. Support the sliding door.
    4. Fig 1: View Of Sliding Door Catch
    GM319980Courtesy of GENERAL MOTORS CORP.
  4. Remove the sliding door catch with the reinforcement channel bolt at the sliding door lower track.
    5. Fig 2: Locating Sliding Door Bracket Bolts
    GM319985Courtesy of GENERAL MOTORS CORP.
  5. Remove the sliding door lower roller bracket bolts.
  6. Remove the sliding door lower roller bracket from the lower track.
About FixVault