FixVault
Home › Chevrolet › 2004 › Venture Base, Van Cargo Extended › Repair and Diagnosis › Electrical › Instrument Panel System Displays, Gauges And Console › Repair Instructions › Driver Information Center Replacement › Installation Procedure

Installation Procedure

    Fig 1: View Of Driver Information Display
    GM318181Courtesy of GENERAL MOTORS CORP.
  1. Install the driver information display to overhead console.
    2. NOTE: Refer toFastener Notice in Cautions and Notices.
  2. Install the driver information display to overhead console screws.

    Tighten:  Tighten the screws to 1 N.m (9 lb in).

  3. Install the overhead console. Refer to Console Replacement - Overhead (Single) , Console Replacement - Overhead (Dual) or Console Replacement - Overhead (CF5) in Interior Trim.
  4. Calibrate the compass. Refer to Electronic Compass Calibration .
About FixVault