FixVault
Home › Chevrolet › 2004 › Venture Base, Van Passenger Extended › Repair and Diagnosis › Engine Performance › System › Engine Control System - 3.4L (Introduction) › Repair Instructions › Ignition Coil(s) Replacement › Removal Procedure

Removal Procedure

  1. Disconnect the spark plug wires. Note the position from which the wires are removed.
    Fig 1: View Of Spark Plug Wire Connections To Ignition Coils
    GM15977Courtesy of GENERAL MOTORS CORP.
  2. Remove the 2 screws securing the ignition coil to the ignition control module.
  3. Remove the ignition coil.
About FixVault