FixVault
Home › Chevrolet › 2004 › Venture LT, FWD › Repair and Diagnosis › External Pages › Different car › Section 408 (Keyless Entry System) › Repair Instructions › Remote Control Door Lock Receiver Replacement › Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 Pontiac Montana, 2002 Oldsmobile Silhouette, and 2002 Chevrolet Venture. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the instrument panel (IP) upper trim. Refer to TRIM PAD REPLACEMENT - IP UPPER .
  2. Disengage the retaining tabs in order to remove the door lock receiver from the IP upper trim.
  3. Disconnect the electrical connector from the door lock receiver.
About FixVault