FixVault
Home › Chevrolet › 2005 › Astro Van Cargo, AWD › Repair and Diagnosis › Engine Performance › System › Engine Controls - (Introduction) Specifications & Repair Instructions › Repair Instructions › Ignition Control Module Replacement › Removal Procedure

Removal Procedure

    Fig 1: View Of Ignition Control Module Assembly
    GM690078Courtesy of GENERAL MOTORS CORP.
  1. Remove the engine cover. Refer to Engine Cover Replacement .
  2. Disconnect the electrical connector (3).
  3. Remove the screws (4) holding the ignition control module (2) and the heat sink (1) to the bracket.
  4. Remove the ignition control module and the heat sink.
About FixVault