FixVault
Home › Chevrolet › 2005 › Astro Van Cargo, AWD › Repair and Diagnosis › Transmission › Automatic Trans › Automatic Transmission - Introduction, Specifications & Repair Instructions › Repair Instructions › Heat Shield Replacement › Installation Procedure

Installation Procedure

    Fig 1: View Of Transmission Heat Shield Bolts & Shield
    GM394459Courtesy of GENERAL MOTORS CORP.
  1. Install the transmission heat shield to the transmission.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the two bolts securing the transmission heat shield to the transmission.

    Tighten:  Tighten the bolts to 17 N.m (13 lb ft).

  3. Lower the vehicle.
About FixVault