FixVault
Home › Chevrolet › 2005 › Astro Van Cargo, RWD › Repair and Diagnosis › Body & Frame › Door Locks › Keyless Entry System › Repair Instructions › Remote Control Door Lock Receiver Replacement › Removal Procedure

Removal Procedure

  1. Remove the left knee bolster. Refer to Knee Bolster Replacement - Left in Instrument Panel, Gages, and Console.
    2. Fig 1: Locating Remote Keyless Entry Antenna
    GM506272Courtesy of GENERAL MOTORS CORP.
  2. Disconnect the remote keyless entry antenna (2) from the receiver (5).
  3. Disconnect the remote keyless entry electrical connector (4) from the receiver (5).
  4. Remove the remote keyless entry module screws from the bracket (3).
  5. Remove the remote keyless entry module from the carrier.
About FixVault