FixVault
Home › Chevrolet › 2005 › Astro Van Cargo, RWD › Repair and Diagnosis › Electrical › Charging Systems › Battery, Charging System And Starting System › Repair Instructions › Battery Replacement › Installation Procedure

Installation Procedure

    Fig 1: View Of Battery Hold-Down Retainer & Bolt
    GM43757Courtesy of GENERAL MOTORS CORP.
  1. Install the battery into the cleaned carrier.
  2. Install the battery hold-down retainer.
    3. NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the retainer bolt.

    Tighten:  Tighten the bolt to 23 N.m (17 lb ft).

  4. Connect the battery positive cable.

    Tighten:  Tighten the cable bolt to 15 N.m (11 lb ft).

  5. Connect the battery negative cable.

    Tighten:  Tighten the cable bolt to 15 N.m (11 lb ft).

About FixVault