FixVault
Home › Chevrolet › 2005 › Astro Van Cargo, RWD › Repair and Diagnosis › Engine Performance › System › Engine Controls - (Introduction) Specifications & Repair Instructions › Repair Instructions › Fuel Strainer Replacement › Removal Procedure

Removal Procedure

  1. Remove the fuel sender assembly. Refer to Fuel Sender Assembly Replacement .
    2. Fig 1: Identifying Fuel Sender Assembly
    GM371000Courtesy of GENERAL MOTORS CORP.
  2. Note the position of the fuel strainer (2) on the fuel sender.
  3. Support the fuel sender assembly with one hand and grasp the strainer (2) with the other hand.
  4. Pull the strainer off the fuel sender. Discard the strainer after inspection.
  5. Inspect the strainer. Replace a contaminated strainer and clean the fuel tank.
About FixVault