FixVault
Home › Chevrolet › 2005 › Astro Van Cargo, RWD › Repair and Diagnosis › Engine Performance › System › Engine Controls - (Introduction) Specifications & Repair Instructions › Repair Instructions › Intake Air Temperature (IAT) Sensor Replacement › Removal Procedure

Removal Procedure

    CAUTION: Refer to Battery Disconnect Caution in Cautions and Notices.
  1. Disconnect the negative battery cable.
    2. Fig 1: Locating Intake Air Temperature (IAT) Sensor Harness Connector
    GM423117Courtesy of GENERAL MOTORS CORP.
  2. Disconnect the intake air temperature (IAT) sensor harness connector.
    3. Fig 2: Intake Air Temperature (IAT) Sensor
    GM317493Courtesy of GENERAL MOTORS CORP.
  3. Remove the IAT sensor from the air cleaner outlet duct by pulling the sensor upward.
About FixVault