Installation Procedure
WARNING: This page is about a different car, the 2005 GMC Sierra and 2005 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
- Connect the coaxial cable to the radio.
- Connect the wire connectors.
- Push in the radio assembly in the opening in order to install the screws.
- Install the 3 screws (1).
Tighten: Tighten the screws to 1.6 N.m (14 lb in).
- Install the cluster bezel. Refer to Bezel Replacement - Instrument Panel (I/P) Cluster in Instrument Panel, Gages and Console.
- Calibrate the new radio assembly. Refer to Service Programming System (SPS) in Programming.
NOTE:
Refer to Fastener Notice
in Cautions and Notices.