FixVault
Home › Chevrolet › 2005 › Avalanche 2500 › Repair and Diagnosis › External Pages › Different car › Section 20 (Engine Controls - 4.3L (Introduction)) › Repair Instructions › Fuel Level Sensor Replacement › Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2005 GMC Sierra and 2005 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Fuel Level Sensor (4.8L, 5.3L, & 6.0L)
    GM1306358Courtesy of GENERAL MOTORS CORP.
  1. Install the fuel level sensor (1).
  2. Install the fuel level sensor retaining clip.
  3. Connect the fuel level sensor electrical connector.
  4. Install the fuel lever sensor electrical connector retaining clip.
  5. Connect the fuel pump electrical connector.
  6. Install the sending unit. Refer to Fuel Sender Assembly Replacement .
About FixVault