FixVault
Home › Chevrolet › 2005 › Chevy Express H1500, Van Cargo › Repair and Diagnosis › Engine Performance › System › Engine Control System - 4.8L, 5.3L, And 6.0L - Introduction › Repair Instructions › Air Cleaner Assembly Replacement › Removal Procedure

Removal Procedure

    Fig 1: Water Outlet Stud Ground Wire
    GM712012Courtesy of GENERAL MOTORS CORP.
  1. Remove the air intake duct. Refer to Air Cleaner Resonator Outlet Duct Replacement .
  2. Disconnect the mass air flow/intake air temperature (MAF/IAT) sensor (5) connector.
  3. Loosen the clamp securing the MAF/IAT sensor to the air cleaner assembly.
  4. Remove the MAF/IAT sensor.
  5. Pull up on the air cleaner assembly (1) to release the retainers from the air cleaner adaptor (2).
About FixVault