FixVault
Home › Chevrolet › 2005 › Classic › Repair and Diagnosis (Single Page) › Engine Performance › System › Engine Control System (Introduction) - 2.2L (L61) › Repair Instructions › Intake Air Temperature (IAT) Sensor Replacement › Removal Procedure

Removal Procedure

  1. Turn OFF the ignition.
    2. Fig 1: IAT Sensor & Harness Connector
    GM785336Courtesy of GENERAL MOTORS CORP.
  2. Disconnect the intake air temperature (IAT) harness connector.
  3. Remove the IAT sensor using a twisting and pulling movement.
About FixVault