FixVault
Home › Chevrolet › 2005 › Classic › Repair and Diagnosis › Body & Frame › Seats › Seat System › Repair Instructions › Seat Switch Replacement - Power › Installation Procedure

Installation Procedure

    Fig 1: View Of Power Seat Switch, Electrical Connector & Switch Bracket Screw
    GM740550Courtesy of GENERAL MOTORS CORP.
  1. Connect the electrical connector (5) to the switch (3).
  2. Position the switch (3) to the seat cushion frame (2).
  3. Install the switch bracket screw (4).

    Tighten:  Tighten the screw to 5 N.m (44 lb in).

  4. Adjust the seat cushion cover (1) to a desired appearance.

    Fasten the cushion cover J-hook retainer.

    5. Fig 2: View Of Power Seat Switch & Bezel
    GM740566Courtesy of GENERAL MOTORS CORP.
  5. Align the bezel (1) to the switch (3).

    Press the bezel (1) into place until fully seated.

  6. Adjust the seat to the original position.
About FixVault