Conditions for Running the DTC

DTCs P0106, P0107, P0108, P0112, P0113, P0117, P0118, P0122, P0123, P0125, P0128, P0201-P0204, P0300, P0315, P0336, P0442, P0446, P0452, P0453, P0455, P0496, P0506, P0507, P0601, P0602, P1621 are not set.
The ECT Sensor parameter is more than 70° C (158° F).
The Ignition 1 Signal parameter is more than 11 volts.
The Fuel Level Sensor parameter is more than 10 percent.
The Engine Run Time parameter is more than 30 seconds.
The Air Flow Calculated parameter is more than 5.5 g/s for 70 seconds.
The TP Sensor parameter is between 8-56 percent.
The MAP Sensor parameter is more than 20 kPa.
The Loop Status parameter is closed.
DTC P0140 runs continuously when the above conditions are met.