FixVault

Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Grand Am and 2004 Oldsmobile Alero. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Installing Compartment Lamp Switch to I/P Compartment
    GM743423Courtesy of GENERAL MOTORS CORP.
  1. If required, install the bulb.
  2. Connect the electrical connector to the I/P compartment lamp switch.
  3. Install the switch to the I/P compartment.
  4. Press in the switch until the retainers are fully seated.
  5. Install the I/P compartment. Refer to Compartment Replacement - Instrument Panel (I/P) in Instrument Panel, Gages and Console.