FixVault
Home › Chevrolet › 2005 › Classic › Repair and Diagnosis › External Pages › Different car › Section 32 (Body Front End) › Repair Instructions › Front Fender Liner Replacement › Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Grand Am and 2004 Oldsmobile Alero. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Front Fender Liner At The Fender
    GM276965Courtesy of GENERAL MOTORS CORP.
  1. Position the fender liner (3) to the front fender.
  2. Install the push-in retainers (4).
    3. NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the screws to the fender liner to the fender.

    Tighten:  Tighten the fender liner screws to 2 N.m (18 lb in).

    4. Fig 2: View Of Front Fender Liner At The Front Bumper Fascia
    GM330141Courtesy of GENERAL MOTORS CORP.
  4. Install the bolts to the front fender liner to the front bumper fascia.

    Tighten:  Tighten the fender liner bolts to 2 N.m (18 lb in).

  5. Install the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
  6. Lower the vehicle.
About FixVault