FixVault
Home › Chevrolet › 2005 › Classic › Repair and Diagnosis › External Pages › Different car › Section 37 (Seat System) › Repair Instructions › Seat Back Frame Replacement - Front › Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Grand Am and 2004 Oldsmobile Alero. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Seat Back Frame, Seat Back Pad & Bolts (Front)
    GM884020Courtesy of GENERAL MOTORS CORP.
  1. Install the seat back frame (5) to the seat back recliner (7).
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the upper seat back recliner bolts (6).

    Tighten:  Tighten the bolts to 18 N.m (13 lb ft).

  3. Install the seat back pad (2) to the seat back frame (5).
  4. Install the seat back cushion cover. Refer to Seat Back Cover Replacement - Front .
About FixVault