FixVault
Home › Chevrolet › 2005 › Classic › Repair and Diagnosis › Restraints › Restraints Control Systems › Seat Belt System › Repair Instructions › Seat Belt Retractor Replacement - Rear › Installation Procedure

Installation Procedure

    Fig 1: Exploded View Of Rear Seat Belt
    GM165423Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: Remove any twists in the seat belt webbing before final assembly.
  1. Install the rear seat outer retractor side belt.
  2. Install the bolt (1) to the rear seat belt retractor.

    Tighten:  Tighten the bolt to 28 N.m (21 lb ft).

  3. Install the anchor plate bolt to the rear seat belt retractor.

    Tighten:  Tighten the bolt to 41 N.m (30 lb ft).

  4. Install the rear window panel trim. Engage the retainers.
  5. Install the rear seat cushion. Refer to Seat Cushion Replacement - Rear in Seats.
  6. Install the rear seat back cushion. Refer to Seat Back Replacement - Rear in Seats.
About FixVault