FixVault
Home › Chevrolet › 2005 › Classic › Repair and Diagnosis › Steering › Power Steering System › Repair Instructions › Power Steering Pump Replacement › Removal Procedure

Removal Procedure

  1. Remove the upper air cleaner and duct. Refer to Air Cleaner Assembly Replacement in Engine Controls - 2.2L (L61).
  2. Remove the evaporative emission (EVAP) canister purge valve.
  3. Remove the power steering hoses from the power steering pump. Refer to the following procedures:
    4. Fig 1: Identifying Power Steering Pump Mounting Bolts
    GM296656Courtesy of GENERAL MOTORS CORP.
  4. Remove the power steering pump mounting bolts (2).
  5. Remove the power steering pump (1) from the engine.
About FixVault