FixVault
Home › Chevrolet › 2005 › Cobalt SS › Repair and Diagnosis › Engine Performance › System › Engine Controls - 2.0L - (Introduction) › Repair Instructions › Boost Control Solenoid Replacement › Removal Procedure

Removal Procedure

    Fig 1: Locating ECT Sensor, Boost Control Solenoid, & IAT Sensor
    GM1389396Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the boost control solenoid connector.
  2. Remove the boost control solenoid retaining bolt.
  3. Remove the boost control solenoid (2).
About FixVault