Installation Procedure
WARNING: This page is about a different car, the 2004 Saturn Ion Red Line, 2004 Saturn Ion 3, 2004 Saturn Ion 2, and 2004 Saturn Ion 1. However, it is still accessible from the selected car via links, so may be relevant.
- Install the wipers/washer signal switch to the steering column.
Tighten: Tighten the wipers/washer signal switch screws to 2 N.m (17 lb in).
- Connect the wipers/washer switch harness connector.
- Install the steering column trim covers. Refer to Steering Column Trim Covers Replacement in Steering Wheel and Column.
NOTE:
Refer to Fastener Notice
in Cautions and Notices.