FixVault
Home › Chevrolet › 2005 › Corvette 2D Convertible, Automatic › Repair and Diagnosis › Engine Performance › System › Engine Controls (Introduction) › Repair Instructions › Air Cleaner Assembly Replacement › Removal Procedure

Removal Procedure

    Fig 1: Air Duct
    GM1465271Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the electrical connector for the mass air flow/intake air temperature sensor (MAF/IAT) (1).
  2. Remove the connection for the IAT sensor (2).
  3. Loosen the clamps (3).
  4. Remove the air intake duct (4).
  5. Remove the MAF/IAT sensor (5).
  6. Remove the air cleaner assembly (6).
About FixVault