FixVault
Home › Chevrolet › 2005 › Cutaway 4.8 V › Repair and Diagnosis › Engine Performance › System › Engine Control System - 4.8L, 5.3L, And 6.0L - Introduction › Repair Instructions › Fuel Tank Pressure Sensor Replacement (Single) › Removal Procedure

Removal Procedure

  1. Remove the fuel tank. Refer to Fuel Tank Replacement (Cutaway Van Side Tank)  or Fuel Tank Replacement (Passenger/Cargo Van)  or Fuel Tank Replacement (Cutaway Van Rear Tank) .
    2. Fig 1: Identifying Fuel Sender Assembly
    GM371000Courtesy of GENERAL MOTORS CORP.
  2. Remove the fuel pressure sensor (1).
About FixVault