FixVault
Home › Chevrolet › 2005 › Cutaway 4.8 V › Repair and Diagnosis › Engine Performance › System › Engine Control System - 4.8L, 5.3L, And 6.0L - Introduction › Repair Instructions › Manifold Absolute Pressure (MAP) Sensor Replacement › Removal Procedure

Removal Procedure

  1. Remove the engine cover. Refer to Engine Cover Replacement in Interior Trim.
  2. Disconnect the manifold absolute pressure (MAP) sensor electrical connector.
    3. Fig 1: Intake Manifold MAP Sensor
    GM260159Courtesy of GENERAL MOTORS CORP.
  3. Remove the MAP sensor (1) from the intake manifold.
About FixVault