FixVault
Home › Chevrolet › 2005 › Epica LS › Repair and Diagnosis › Electrical › Component Locations › Lighting Systems › Repair Instructions › License Lamp Replacement › Removal Procedure

Removal Procedure

    Fig 1: View Of license Plate Lamp Assembly And Screws
    GM1256524Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to Battery Disconnect Caution in Cautions and Notices.
  1. Disconnect the negative battery cable.
  2. Remove the screws and the license plate lamp assembly.
  3. Remove the bulb.
About FixVault