FixVault
Home › Chevrolet › 2005 › Epica LS › Repair and Diagnosis › Electrical › Component Locations › Lighting Systems › Repair Instructions › Repeater Lamp Replacement › Installation Procedure

Installation Procedure

    Fig 1: View Of Side Turn Signal Lamp And Electrical Connector
    GM1256516Courtesy of GENERAL MOTORS CORP.
  1. Insert and twist to install the replacement bulb into the side turn signal lamp.
  2. Connect the electrical connector.
  3. Install the side turn signal lamp into the fender.
  4. Connect the negative battery cable.
About FixVault