FixVault
Home › Chevrolet › 2005 › Epica LS › Repair and Diagnosis › Quick Lookups › Electrical Component Locations › Lighting Systems › Repair Instructions › Door Lamp Replacement › Removal Procedure

Removal Procedure

    Fig 1: View Of Front Door Step Lamp And Lens
    GM1256530Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to Battery Disconnect Caution in Cautions and Notices.
  1. Disconnect the negative battery cable.
  2. Remove the front door step lamp lens cover.
  3. Reposition the lower half of the front door trim panel.
  4. Remove the front door step lamp.
  5. Disconnect the electrical connector.
About FixVault