FixVault
Home › Chevrolet › 2005 › Equinox LS, AWD › Repair and Diagnosis › Engine Performance › System › Engine Controls - 3.4L - Introduction › Repair Instructions › Heated Oxygen Sensor Replacement - Position 1 › Removal Procedure

Removal Procedure

    Fig 1: View Of HO2S 1
    GM1087793Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the HO2S 1 harness connector.
  2. Remove the HO2S 1 from the exhaust manifold.
About FixVault