FixVault
Home › Chevrolet › 2005 › Equinox LT, AWD › Repair and Diagnosis › Engine Performance › System › Engine Controls - 3.4L - Introduction › Repair Instructions › Engine Coolant Temperature (ECT) Sensor Replacement › Removal Procedure

Removal Procedure

  1. Engine coolant must be drained below the level of the engine coolant temperature (ECT) sensor. Refer to Draining and Filling Cooling System in Engine Cooling.
    2. Fig 1: View Of ECT Sensor
    GM1087791Courtesy of GENERAL MOTORS CORP.
  2. Disconnect the ECT sensor harness connector.
  3. Remove the ECT sensor.
About FixVault