FixVault
Home › Chevrolet › 2005 › Impala LS › Repair and Diagnosis › Engine Performance › System › Engine Control System - 3.8L (L36 And L67) - Introduction (2 Of 2) › Repair Instructions › Accelerator Controls Cable Bracket Replacement › Removal Procedure

Removal Procedure

    Fig 1: Removing/Installing Cruise Control Cable At Bracket
    GM179339Courtesy of GENERAL MOTORS CORP.
  1. Remove the fuel injector sight shield. Refer to Fuel Injector Sight Shield Replacement (L36) or Fuel Injector Sight Shield Replacement (L67) in Engine Mechanical - 3.8L.
  2. Remove the cruise control cable from the throttle body lever.
  3. Remove the cruise control cable (1) from the bracket (2).
    4. Fig 2: Removing/Installing Accelerator Cable
    GM179346Courtesy of GENERAL MOTORS CORP.
  4. Remove accelerator cable from the throttle body lever.
  5. Remove the accelerator cable (2) from the bracket (1).
    6. Fig 3: Removing/Installing Accelerator Controls Cable Bracket
    GM12246Courtesy of GENERAL MOTORS CORP.
  6. Remove the accelerator controls cable bracket bolts.
  7. Remove the accelerator controls cable bracket from the throttle body.
About FixVault