Installation Procedure

WARNING: This page is about a different car, the 2012 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Disconnecting Accelerator Pedal Position Sensor Electrical Connector

GM1544734

Courtesy of GENERAL MOTORS COMPANY

Install the APP sensor (2).

CAUTION:

Refer to Fastener Caution .

Install the APP bolts (1) and tighten to 10 N.m (89 lb in).
Connect the APP sensor electrical connector.
Confirm that the APP sensor connector locking clip is fully secured.