FixVault
Home › Chevrolet › 2005 › Impala LS › Repair and Diagnosis › Restraints › Restraints Control Systems › Seat Belt System › Repair Instructions › Seat Belt Buckle Replacement - Left Front › Installation Procedure

Installation Procedure

    Fig 1: Removing/Installing Seat Belt Buckle Anchor Stud Nut - Left Front
    GM471317Courtesy of GENERAL MOTORS CORP.
  1. Install the seat belt buckle to the left front seat.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the nut to the seat belt anchor stud.

    Tighten:  Tighten the seat belt buckle anchor nut to 42 N.m (31 lb ft).

    3. Fig 2: View Of Left Front Seat Belt Buckle
    GM519326Courtesy of GENERAL MOTORS CORP.
  3. Connect the electrical connector to the seat belt buckle.
  4. Position the left front seat to the original position.
About FixVault