FixVault
Home › Chevrolet › 2005 › Impala LS › Repair and Diagnosis › Transmission › Automatic Trans › Automatic Transaxle - Introduction & Repair Instructions › Repair Instructions › Fluid Temperature Sensor Replacement › Removal Procedure

Removal Procedure

  1. Remove the case side cover. Refer to Case Side Cover Replacement .
    2. Fig 1: Locating Wiring Harness & Electrical Connectors
    GM48209Courtesy of GENERAL MOTORS CORP.
  2. Disconnect the wiring harness assembly from the fluid temperature sensor (391).
  3. Remove the fluid temperature sensor (391).
About FixVault