FixVault
Home › Chevrolet › 2005 › Impala SS › Repair and Diagnosis › Brakes › Antilock Brake System And Traction Control System › Repair Instructions › Traction Control Switch Replacement (Monte Carlo) › Removal Procedure

Removal Procedure

    Fig 1: Identifying Front Floor Console Trim Plate Screw (Monte Carlo)
    GM578742Courtesy of GENERAL MOTORS CORP.
  1. Apply the parking brake.
  2. Remove the center console mat.
  3. Position the transaxle shift control lever as required.
  4. Remove the front floor console trim plate screw (1).
  5. Lift the front floor console trim plate up and rearward for access to the traction control switch.
    6. Fig 2: Removing/Installing Traction Control Switch From Floor Console Trim Plate (Monte Carlo)
    GM578676Courtesy of GENERAL MOTORS CORP.
  6. Disconnect the electrical connector from the traction control switch.
  7. Remove the traction control switch from the floor console trim plate.
About FixVault