FixVault
Home › Chevrolet › 2005 › Impala SS › Repair and Diagnosis › External Pages › Different car › Section 1192 (Power Steering System) › Repair Instructions › Power Steering Pump Flow Control Valve Replacement - Off Vehicle › Disassembly Procedure

Disassembly Procedure

WARNING: This page is about a different car, the 2012 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Power Steering Pump Flow Control Valve
    GM1776816Courtesy of GENERAL MOTORS COMPANY
  1. Remove the power steering pump flow control valve fitting (5) from the power steering pump housing (1).
  2. Remove the power steering pump flow control valve fitting O-ring seal (4) from the power steering pump flow control valve fitting (5).
  3. Remove the power steering pump flow control valve (3).
  4. Remove the power steering pump flow control valve spring (2).
About FixVault