Installation Procedure
WARNING: This page is about a different car, the 2012 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
- Install the spark plugs and tighten the plugs to 20 N.m (15 lb ft.
Specification
The spark plug gap is 1.0 mm (0.040 in).
- Install the ignition coil(s). Refer to Ignition Coil Replacement (LE5, LE9, or LAF) .
CAUTION:
Do not coat spark plug threads with anti-seize compound. If anti-seize compound is used and spark plugs are over-torqued, damage to the cylinder head threads may result.
CAUTION:
Refer to Fastener Caution .