FixVault
Home › Chevrolet › 2005 › Impala SS › Repair and Diagnosis › External Pages › Different car › Section 936 (Disc Brake System) › Repair Instructions › Rear Disc Brake Backing Plate Replacement › Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2008 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Wheel Bearing/Hub Assembly Nuts
    GM1276112Courtesy of GENERAL MOTORS CORP.
  1. Remove the wheel bearing/hub. Refer to Rear Wheel Bearing and Hub Replacement .
    2. IMPORTANT: The shield is attached to the wheel knuckle through the wheel bearing hub bolts.
  2. Remove the shield from the wheel knuckle.
About FixVault