FixVault
Home › Chevrolet › 2005 › Malibu Base › Repair and Diagnosis › Body & Frame › Door Locks › Keyless Entry System › Repair Instructions › Remote Control Door Lock Receiver Replacement (Extended Sedan) › Installation Procedure

Installation Procedure

    Fig 1: Removing Receiver From Vehicle
    GM1250548Courtesy of GENERAL MOTORS CORP.
  1. Install the receiver to the vehicle.
  2. Connect the electrical connectors to the receiver.
  3. Install the rear quarter lower trim panel. Refer to Trim Panel Replacement - Rear Quarter Lower (Extended Sedan) in Interior Trim.
About FixVault