FixVault
Home › Chevrolet › 2005 › Malibu Base › Repair and Diagnosis › Electrical › Instrument Panel System Displays, Gauges And Console › Repair Instructions › Console Replacement › Installation Procedure

Installation Procedure

    Fig 1: View Of Electrical Connectors And Console
    GM1207909Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: Do not let the console contact the shifter handle or bezel.
  1. Connect the electrical connectors and install the console.
    2. Fig 2: View Of Pen Tray
    GM1207906Courtesy of GENERAL MOTORS CORP.
  2. Install the pen tray.
    3. Fig 3: View Of Rear Console Bolts
    GM1207907Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the rear console bolts.

    Tighten:  Tighten the bolts to 1 N.m (10 lb in).

  4. Install the front console screws.

    Tighten:  Tighten the bolts to 1 N.m (10 lb in).

    5. Fig 4: View Of Front Console Screws
    GM1207902Courtesy of GENERAL MOTORS CORP.
  5. Install the front console screw cover.
  6. Install the left console trim panel. Refer to Console Trim Panel Replacement - Left .
  7. Install the right console trim panel. Refer to Console Trim Panel Replacement - Right .
About FixVault