FixVault
Home › Chevrolet › 2005 › Malibu Base › Repair and Diagnosis › Engine Performance › System › Engine Control System - 2.2L (L61) - Introduction › Repair Instructions › Ignition Control Module Replacement › Removal Procedure

Removal Procedure

    Fig 1: Removing & Installing Ignition Control Module
    GM896789Courtesy of GENERAL MOTORS CORP.
  1. Turn the ignition OFF.
  2. Disconnect the electronic ignition (EI) module harness connector.
  3. Remove the EI module attachment screws and the EI module.
About FixVault