FixVault
Home › Chevrolet › 2005 › Malibu LS › Repair and Diagnosis › Brakes › Antilock Brake System And Traction Control System › Repair Instructions › Traction Control Switch Replacement › Installation Procedure

Installation Procedure

  1. Install the traction control switch wire harness connector.
    2. Fig 1: Removing Traction Control Switch From Behind Console
    GM1208001Courtesy of GENERAL MOTORS CORP.
  2. Install the traction control switch.
  3. Install the left console trim panel. Refer to Console Trim Panel Replacement - Left in Instrument Panel, Gages and Console.
About FixVault