FixVault
Home › Chevrolet › 2005 › Optra5 Base, Automatic › Repair and Diagnosis › Body & Frame › Windows › Doors › Repair Instructions › Door Handle Replacement - Outside › Installation Procedure

Installation Procedure

    Fig 1: View Of Outside Door Handle Components
    GM1309063Courtesy of GENERAL MOTORS CORP.
  1. Connect the outside door handle and the lock rods.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the door handle with the bolts.

    Tighten:  Tighten the outside door handle bolts to 4.5 N.m (40 lb in)  .

  3. Install the door seal trim. Refer to Water Deflector Replacement - Door .
About FixVault