FixVault

Installation Procedure

    Fig 1: View Of Front Door Lock, Lock Rods And Screws
    GM1309046Courtesy of GENERAL MOTORS CORP.
  1. Connect the electrical connector.
  2. Connect the lock rods.
  3. NOTE: Refer to Fastener Notice in Cautions and Notices.
  4. Install the front door lock with the screws.

    Tighten:  Tighten the front door lock screws to 8 N.m (71 lb in)  .

  5. Install the seal trim. Refer to Water Deflector Replacement - Door .
  6. Connect the negative battery cable.