FixVault
Home › Chevrolet › 2005 › Optra5 Base, Automatic › Repair and Diagnosis › Electrical › Gauges › Instrument Panel, Gages, And Console › Repair Instructions › Audio Alarm Module Replacement › Installation Procedure

Installation Procedure

    Fig 1: View Of Audio Alarm Module Electrical Connector
    GM1308586Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  1. Install the chime module with the screws.
  2. Connect the electrical connector.
  3. Install the knee bolster trim panel beneath the steering column.
  4. Connect the negative battery cable.
About FixVault