FixVault
Home › Chevrolet › 2005 › Optra5 Base, Automatic › Repair and Diagnosis › Engine Performance › System › Engine Controls - 1.8L (L79) - Introduction And Mechanical Repairs › Repair Instructions › Intake Air Temperature (IAT) Sensor Replacement › Removal Procedure

Removal Procedure

    Fig 1: View Of IAT Sensor And Connector
    GM1289424Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to Battery Disconnect Caution in Cautions and Notices.
  1. Disconnect the negative battery cable.
  2. Disconnect the intake air temperature (IAT) sensor connector.
  3. Remove the IAT sensor by pulling it out of the air intake tube.
About FixVault