FixVault
Home › Chevrolet › 2005 › SSR Automatic › Repair and Diagnosis › External Pages › Different car › Section 143 (Engine Controls - Introduction) › Repair Instructions › Ignition Control Module Replacement - Bank 2 › Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2005 Saturn L300. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Removing/Installing Ignition Module
    GM894329Courtesy of GENERAL MOTORS CORP.
  1. Remove the ignition module bolts.
  2. Remove the ignition module.
About FixVault